| Agee-Acosta, Nicholas R |
Hot Corrosion of a Nickel Chromium Alloy Underneath a Molten Sodium Sulfate Salt at 900 C |
| Allbee, Dylan |
Emergent Behavior in a Collection of Simple Robots |
| Alvarado, Eloisa |
Processing and Characterization of Ceramic-Metal Composites |
| Anjunyan, Harut |
Processing and Characterization of Ceramic-Metal Composites |
| Baghdasarian, Sevana |
Characterization of Sodium Oxide Impregnated Alumina as a CO2 Adsorbent |
| Bazylev, Yuriy |
Mechanical Behavior of Spider Silk |
| Bosque, Evan |
Helicopter Main Rotor Noise Reduction by Use of Leading-Edge Serrations |
| Caldwell, Michael |
Emergent Behavior in a Collection of Simple Robots |
| Cardenas, Juan |
Discovering Analogues for Solar System Ices: Physical and Numerical Modeling of Highly Porous Sintered Soda-Lime Glass Powder |
| Carey, Thomas |
Fabrication and Testing of an Integrated Cartridge for Point of Care Infectious Disease Diagnosis |
| Chavez, Kevin |
Electrochemical Analysis of Conducting Polymers PEDOT:PSS/PVA |
| Chen, Jianchi |
Optimizing Cu2O-MgxZn1-xO heterojunction photovoltaic material |
| Cheng, Puikei |
Investigating the fiber-resin interface of carbon-fiber-reinforced polymer composites with nanoscale analysis |
| Cioni, Shane |
Development of an Equibiaxial Test Fixture to Determine the Strength of Ceramics and Composites |
| Coronado, Armando R |
Hot Corrosion of a Nickel Chromium Alloy Underneath a Molten Sodium Sulfate Salt at 900 C |
| Cruz, Daniela |
Magnetoacoustic Assembly of Colloidal Alloys |
| Daniel, Phillip |
End Effector Design and Fabrication for Multi-Surface Adhesion |
| Deras, Yensi |
The Use of Solid Phase Change Material as a Strategy for Temperature Mitigation and Improved Efficiency of Solar Panels |
| Dong, Yishun |
Coding for Decentralized Control System |
| FanaeianSeyediTousi, Marzieh |
Towards a Biomineralized Photocatalyst: Identification of a ZnO-binding Peptide |
| Gaw, Geoffrey |
Processing and Characterization of Ceramic-Metal Composites |
| Gepford, Charles |
Hot Corrosion of a Nickel Chromium Alloy Underneath a Molten Sodium Sulfate Salt at 900 C |
| Grino, Michael |
RF Source Tracking with Unmanned Autonomous Vehicles |
| Gutierrez, Oscar |
Greener Structural Concrete with Recycled Material's |
| Han, Jeff |
Highly Bendable Regioregular Poly(3-alkylthiophene) Sorted Semiconducting Single-Walled Carbon Nanotube Transistors and CMOS Inverters |
| Hastings, Richard T |
Reduction in Ground Motion with Soil Replacement |
| Hoang, Kathleen |
Estimation of Human Pinnae Measurements through Computer Vision |
| Houck, Andrew |
Prime Focus Spectrograph (PFS) Fiber Positioner Testbed Development |
| Hsia, Patricia |
Physical and Digital Model of the San Dimas Watershed for Educational, Research, and Outreach Purposes |
| Hsu, Daniel |
Understanding the Role of Nanoscale Metallic Patterns in Surface Enhanced Raman Scattering (SERS) |
| Ismail, Fatin |
Protective Coatings for Austenitic Stainless Steels |
| Johnson, Melissa |
Radio Propagation Models for Pico-cellular Networks |
| Kim, Laura |
BiVO4 Photoanodes in Combination with Heterogeneous Oxygen Evolution Catalysts for Solar Water-Splitting |
| Konecny, Kyle |
Greener Structural Concrete with Recycled Material's |
| Kramer, Sean |
Design and build an aquaponics |
| Lay, Clayton J |
Helicopter Main Rotor Noise Reduction by Use of Leading-Edge Serrations |
| Lee, Eun Jee |
Impact of a Single Edge on the Network Capacity |
| Lemmon, Alexander |
The Application of Shredded Rubber Tire in Construction |
| Leon, Esteban |
Design and build a MIcroturbine |
| Lim, Ee Jane |
Nanoindentation Modeling of Viscoplastic Solids |
| Lopez, Jessica |
Mechanical Behavior of Spider Silk |
| Lopez, Christopher |
Protective Coatings for Austenitic Stainless Steels |
| Lu, Rex |
Gait Analysis using BCI and Multi-Sensor System |
| Ly, Bert |
Soil Quality and Urban Gardening Abstract |
| Ly , Anderson |
Design and build a MIcroturbine |
| Mao, Sien |
Circuit Design for a Prototype Ultrasound Fingerprint Sensor |
| Mauricio, Omar |
Performance-Based Seismic Design of Steel Moment Frame Buildings with Supplemental Passive Dampers |
| Medina, Andres |
IDENTIFYING LIQUEFACTION POTENTIAL AND EXPLORING DEWATERING TECHNIQUES TO MITIGATE HAZARDS |
| Megerdichian, Zorineh |
Protective Coatings for Austenitic Stainless Steels |
| Meza, Miguel |
Preventing Carbon-Carbon Composite Disc Brakes from Oxidizing |
| Moraga, Everth A |
Helicopter Main Rotor Noise Reduction by Use of Leading-Edge Serrations |
| Motzny, Alexander |
Strength and Stiffness of Cement Modified Clays |
| Moubayed, Suzanne |
Effect of Modified Soil on Shear Strength |
| Nataraj, Chiraag |
Modeling of Negative Index Metamaterials for "Hide-in-Plain-Sight" |
| Niyathapala, Sensika |
Analysis and Development of a Meal Detection Algorithm for the Artificial Pancreas |
| Noriega , Danielle |
Corrosion Behavior of Advanced Titanium Alloys in Saline Solutions |
| Obidah, Joshua |
Characterization of Sodium Oxide Impregnated Alumina as a CO2 Adsorbent |
| Oh, Ryan |
Corrosion Behavior of Advanced Titanium Alloys in Saline Solutions |
| Pagenkopf, Dano |
Characterization of bulk gallium nitride by defect-selective wet etching |
| Petrillo, Emily C |
US/China IRES Program: Wireless Communication |
| Phipps, Sarah |
Protective Coatings for Austenitic Stainless Steels |
| Ramirez, Christopher |
Aircraft Integrated Research Vehicle Optimal Loading Test-Stand (AIRVOLT) |
| Ramirez, Brian |
Mechanics of Deformation and Fracture of Soft Fiber Reinforced Composites |
| Ravi, Rukmini |
Monitoring corrosion using visible light |
| Rubalcava, Jorge |
Runoff Water: Woodchips Bioreactors |
| Rubalcava, Jorge |
Runoff Water: Woodchips Bioreactors |
| Ruiz, Silman |
Surface area characteristics of expansive clays – for sustainable infrastructure development |
| Schoniger, Stephen F |
Hot Corrosion of a Nickel Chromium Alloy Underneath a Molten Sodium Sulfate Salt at 900 C |
| Schultz, Nathan |
Development of an Equibiaxial Test Fixture to Determine the Strength of Ceramics and Composites |
| Sgantas, Kiara |
The Work of a Test Information Engineer |
| Shafahi, Maryam |
Design and build a MIcroturbine |
| Sharma, Abhinav |
Characterization of biomarkers in breast cancer cells with quantum dots and detection of brain tumor cells using SpectroPen |
| Singh, Ajay |
Processing and Characterization of Ceramic-Metal Composites |
| Slabber, Nico |
Processing and Characterization of Ceramic-Metal Composites |
| Soemardy, Adhitya |
Improving Electrospinning Technique for Better Alignment of Carbon Nanofibers |
| Soodjinda, Justin |
Processing and Characterization of Ceramic-Metal Composites |
| Stoops, Brian |
Protective Coatings for Austenitic Stainless Steels |
| Styler, Kelby |
Modification of Soil Permeability Using Shredded Rubber |
| Sung, Kevin |
Developing an in vitro model for soft tissue inflammatory response to biomaterials |
| Tran, Anthony |
Integration of an Eye-Tracking Device with a Haptic Robot for Eye Hand Coordination Assessment |
| Tran, Anthony |
Integration of an Eye-Tracking Device with a Haptic Robot for Eye Hand Coordination Assessment |
| Trieu, Vincent |
Design and build a MIcroturbine |
| Tsuboyama, Ayaka |
Corrosion Behavior of Advanced Titanium Alloys in Saline Solutions |
| Varona, Martin |
Traffic Analysis of Nutwood Avenue |
| Vega, Eduardo |
Maximizing Learning from Real Earthquakes |
| Vendiola, Vincent |
Generation and Decay of High-Intensity Turbulence |
| Verma, Malvika |
Image Processing Techniques for PV-OCT Imaging of Human Eye |
| Versosa, Derren |
Integration of an Eye-Tracking Device with a Haptic Robot for Eye Hand Coordination Assessment |
| Villalpando , Obed |
Hot Corrosion of a Nickel Chromium Alloy Underneath a Molten Sodium Sulfate Salt at 900 C |
| Wang, Eric |
Anonymous Networking against Active Adversaries |
| Whitehead, Jacklyn |
The Use of Inexpensive Natural Organic Materials in Dye-Sensitized Solar Cells |
